SLIDEX 3 PIPE GUIDE & SUPPORT

The Slidex 3 Slide Guide 437 is in the family of slide guides that also act as supports provided by Flexicraft, and is best suited for 10" to 24" diameters.  The maximum load is 24,000lbs, derated for temperatures up to 400F.  (The Slidex 1 is for up to 4", and the Slidex 2 is for 5" to 8" diameters.)

The slide guides use a fixed base and heat cured slide bearing pad with a sliding section that is welded to the pipe, unless a clamp option is needed.  They are also available with a pre-insulation.  (Contact factory for clamps, pre-insulation, or for stainless steel.)

They are ideal for use with expansion joints such as those provided by Flexicraft. They are available with a weld down base or a bolt down base, and for 4" or 10" of movement.  The slide guides are to be used in an upright position and supported from the bottom, and their maximum recommended load is dependent on temperature.  See the pdf submittal sheets for more details.

Temp(F)

Load Factor

70 1.00
100 0.85
200 0.55
300 0.40
400 0.25
Illustration Image
swipe to see more products
MODEL TYPE LNGTH
(in)
MVMNT
(in)
WT
(lbs)
 SLDX3BS   BOLT DOWN   6   4   16.4 
 SLDX3BL   BOLT DOWN   12   10   26.3 
 SLDX3WS   WELD DOWN   6   4   12.3 
 SLDX3WL   WELD DOWN   12   10   22.2