INDUSTRIAL HOSE

Flexicraft provides a complete line of hose assemblies used throughout industry to quickly meet the needs of our customers.  Choose from the product offering below, or for more choices go to our Hosecraft USA division at www.hosecraftusa.com. 

	SB1 BRAIDED STAINLESS - SB1 is corrugated stainless steel hose with a single stainless steel braid.  It has large pressure and temperature capacities, and is resistant to bursting, cracking, and crushing, while being quite flexible.  1/4" to 24" diameters. -320F to 1500F.
	BB1 BRAIDED BRONZE - BB1 is a corrugated bronze hose with a single bronze braid. It has a high pressure capacity at high temperatures. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 3" diameters. -50F to 450F.
	SU1 UNBRAIDED STAINLESS - SU1 is a corrugated stainless steel hose that can be used at lower pressures at high temperatures. For higher pressures, see the braided metal hoses options. 1/4" to 24" diameters. -320F to 1500F.
	SI1 INTERLOCKED METAL - SI1 is a stripwound interlocked stainless steel hose. It is relatively lightweight but tough, and is resistant to high temperatures. Applications include bulk material handling, hot fume, engine exhaust, and many others. 1" to 14" diameters. -50F to 1200F.
	TS1 TEFLON SMOOTH BORE - TS1 is a smooth bore PTFE Teflon ® hose with a stainless steel braiding. It is lightweight, and handles a very broad range of chemicals at relatively high pressures. It is used in applications where continual large bending is not required. 3/16" to 1-1/4" diameters. -65F to 450F.
	TC1 TEFLON CONVOLUTED - TC1 is a convoluted PTFE Teflon ® hose with a stainless steel braiding. The convolutions provide a far tighter bend radius than the smooth bore alternatives. It is lightweight, and handles a very broad range of chemicals at relatively high pressures. 3/8" to 4" diameters. -65F to 400F
	TR1 TEFLON RUBBER COVERED - TR1 is a rubber covered, smooth bore FEP Teflon ® hose. It handles a very broad range of chemicals and is used in countless tough chemical, pharmaceutical and sanitary applications. 1/2" to 4" diameters. -40F to 250F.
	RN1 RUBBER SUCTION - The Model RN1 is a quality rubber suction hose designed for rugged applications, and makes tighter bends without kinking. It is reinforced with textile plies and a helical wire. 1-1/4" to 12" diameters. -40F to 180F.
	RD1 RUBBER DISCHARGE - RD1 is a quality rubber discharge hose designed for applications where suction is not required. This is a versatile choice for many applications, and it includes a top grade EPDM rubber cover. 1-1/2" to 12" diameters. -40F to 180F.
	PN1 PVC SUCTION - PN1 is a lightweight and economical PVC suction ready hose with a smooth bore. 1" to 12" diameters. 15F to 150F.
	PN2 CLEAR PVC SUCTION - PN2 is a lightweight and flexible, high quality PVC hose specially designed for suction or transfer applications where visual flow is preferred. It has a smooth bore and an external rigid orange PVC helix. 1-1/2" to 10" diameters. 5F to 150F.
	PD1 PVC DISCHARGE - PD1 is a PVC blue discharge lay-flat hose that resists kinking and twisting. Designed for standard duty applications. It is strong and economical, and rolls up flat for easy storage. 1-1/2" to 16" diameters. 5F to 130F.
	RM1 MULTIPURPOSE RUBBER - RM1 is a premium quality multipurpose Nitrile hose that is recommended for many abusive industrial applications up to 2" diameters. It is oil resistant and right for air, water, and many chemicals as well, and has excellent kink and abrasion resistance. -20F to 190F.
	RM2 MULTIPURPOSE RUBBER EPDM - RM2 is an economical multipurpose EPDM hose recommended for water and air, as well as many other industrial and construction uses (not suitable for petroleum products) up to 2" diameters. It has excellent weather and abrasion resistance. -40F to 190F.
	RO1 PUSH-ON HOSE - RO1 is a top quality multipurpose hose for use with convenient push-on fittings that require no tools. It has an oil and heat resistant nitrile tube and neoprene oil resistant cover. All sizes are 300psi and RMA Class A. 1/4" to 3/4" diameters. -40F to 190F.
	PM1 MULTIPURPOSE PVC - PM1 is a lightweight and economical multipurpose PVC hose recommended for water, air, and mild water-soluble chemical applications. Available in 500ft coils only. 1/4" to 1" diameters. -15F to 150F.
	LS1 PLASTIC SUCTION - LS1 is a lightweight, crush resistant and non-kinking plastic suction hose that retains its excellent flexibility even in the cold weather. A smooth bore tube minimizes material buildup and is resistant to a variety of chemicals in sanitary and many other demanding applications. 1-1/2" to 4" diameters. -40F to 140F.
	RP1 PETROLEUM TRANSFER - RP1 is the industry standard for suction ready in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 150psi pressures. Also available in ready made assemblies. 1-1/4" to 4" diameters. -40F to 180F. 00F.
	RP2 PETROLEUM EXTRAFLEX - RP2 is premium petroleum hose with the ultimate in flexiblity that uses a lightweight, kink-resistant construction. It is designed for suction and discharge of refined petroleum products. 1-1/2" to 6" diameters. -40F to 180F.
	RS1 RUBBER SANITARY - RS1 is a high quality food transfer hose for suction or discharge of a non-oil edible products. Gray EPDM cover with a white Chlorobutyl tube. Resistant to CIP cleaning solutions and can be steam cleaned. Meets FDA requirements. 3/4" to 4" diameters. -40F to 240F.
	RS2 RUBBER SANITARY - RS2 is a high quality food transfer hose for discharge of a non-oil edible products. Gray EPDM cover with a white Chlorobutyl tube. Resistant to CIP cleaning solutions and can be steam cleaned. Meets FDA requirements. 3/4" to 4" diameters. -40F to 240F.
	RS4 RUBBER SANITARY - RS4 is a high quality food transfer hose for suction or discharge of a wide variety of oily and nonoily edible products. Gray Nitrile/PVC abrasion resistant cover with a white Nitrile tube that is reinforced with a wire helix. Meets FDA requirements. 3/4" to 4" diameters. -40F to 210F.
	RC1 CHEMICAL UHMWPE - RC1 quality rubber UHMWPE lined chemical suction ready hose. It is capable of handling 98% of all known industrial chemicals. 1/2" to 3" diameters. -40F to 150F.
	RC2 CHEMICAL EXTRAFLEX - RC2 is an premium quality extra flexible XLPE lined, suction ready chemical hose that uses a lightweight, kink-resistant construction. 1" to 4" diameters. -40F to 250F.
	RT1 STEAM - RT1 is a quality rubber steam hose with a heat resistant EPDM tube and cover for maximum life. 1/2" to 3" diameters. -20F to 415F.
	RV1 OVER THE PIPE - RV1 hose can slip over piping outer diameters for a sleeve fit. 7/8" to 5-1/2" inner diameters. 0F to 212F.
	PH1 PVC MATERIAL HANDLING - PH1 is a high quality rubber & PVC blend material handling hose. It provides quiet operation, good bendability, and good abrasion resistance with a smooth bore. It is made for transferring and suction of dry materials, and dissipates static. 1" to 12" diameters. 0F to 150F.
	PH2 PVC CLEAR MATERIAL HANDLING - PH2 is a clear PVC dry material handling hose provides quiet operation and visual confirmation of flow. Food grade, FDA, USDA, and 3-A approved. 1" to 8" diameters. 15F to 150F.
	RH1 RUBBER MATERIAL HANDLING - RH1 is a heavier weight rubber material discharge hose designed to handle a variety of slurries & highly abrasive materials. A thick, FDA natural rubber tube is used for abrasion resistance, with a high grade cover. 1-1/2" to 12" diameters. -20F to 190F.
	RH2 CONVOLUTED TRANSFER - RH2 is a heavier weight, rubber material handling hose designed to handle a variety of slurries and dry, highly abrasive materials. It uses our split aluminum flanges that quickly bolt together in the field. FDA natural rubber tube. 2" to 14" diameters. -25F to 180F.
	HM1 HYDRAULIC - The Model HM1 is a rubber SAE 100R1AT hydraulic hose for pressure hydraulic oil and other systems. It uses a black Nitrile tube and black Neoprene cover with one wire braid reinforcement. MSHA approved. 3/16" to 1" diameters. -40F to 212F.
	PT1 REINFORCED CLEAR PVC - PT1 is a clear PVC tubing hose with a polyester yarn braid reinforcment for higher pressures. FDA, USDA, 3A and NSF grade. 3/16" to 2" diameters. 25F to 150F.
	PT2 CLEAR PVC TUBING - PT2 is a crystal clear unreinforced PVC tubing with a smooth interior. FDA, USDA, 3A and NSF grade. 1/16" to 2" diameters. 25F to 150F.
	ET1 LLDPE POLYETHYLENE TUBING - ET1 is an LLDPE Polyethylene Tubing that is economical and lightweight, and stands up to environmental stress cracking and higher pressures. The chemically inert linear low density polyethylene is also a food grade material. 1/8" to 1-1/2" diameters. -50F to 140F.
	TD1 THERMOPLASTIC RUBBER DUCT - TD1 is a tough and light weight thermoplastic rubber hose that is very well suited to most industrial duct and fume jobs, as well as light material handling. 2" to 24" diameters. -60F to 275F.
	FD1 HIGH TEMP. DUCT - FD1 is a top quality rubber duct hose for high temperature air flow and fume removal. A two-ply fiberglass, coated with silicone gives a rating of 500 deg F, and the smooth bore allows for maximum air flow. 3/4" to 12" diameters. -75F to 500F.
	VB1 UTILITY BLOWER - VB1 is a lightweight, economical, and durable utility hose is designed for maximum airflow in positive pressure venting applications. It resists UV rays, ozone, and mildew, and can be easily stored as well. 3" to 24" diameters. -20F to 180F.
	PV1 INDUSTRIAL VACUUM - PV1 is a vacuum PVC hose that can be used across a wide range of air handling and vacuum applications. Composed of a high strength fiber reinforced PVC, and offering excellent flexibility for ease of use. 3/4" to 6" diameters. -60F to 150F. tory.